Detailed Product Description
| Material: |
Brass + Ceramic |
Size: |
0.30mm |
| Connection: |
10/24" Male Thread |
Pressure: |
400 - 1000PSI |
| High Light: |
fogging machine, pond fog machine |
Brass High Pressure Cooling Nozzle Pond Fog Machine For Cold Fog System 0.30mm
| High Pressure Cooling Fog Nozzle |
| Size |
10/24" external thread |
Specification |
0.15mm |
| Material |
Stainless Steel + Ceramics Core |
0.20mm |
| 0.30mm |
Description:
The High Pressure Cooling Fog Nozzles using the latest laser technology, to ensure the precision and service life of the nozzles. Nozzle chip adopt super hardness precision ceramic or stainless steel 304 material, with good corrosion resistance, resistance to wear and anti-clogging performance.
The High Pressure Cooling Fog Nozzles consists of brass nozzle body with internal stainless steel core and stainless steel deflector vane with a anti-drop device inside.
Under the hydraulic pressure of 70 kg to 120 kg, the high velocity liquid flows form a centrifugal swirl and thus generate fine misting drops with a hollow cone spray pattern.
It is equipped with TEFLON strainer and the fog droplet sizes are about 50um.
They are widely used in workshop moistening, salt spray test, man-made fog and other moistening locations.
The orifice on this type of nozzle with diameters between 0.1mm-0.5mm is drilled by US-imported punching machine.
Compared with air moisturizing, it cuts cost by ten times.
