Detailed Product Description
| High Light: |
automatic pool control system, swimming pool remote control systems |
Embedded Type Filtration System Swimming Pool Control System With Dosing Function
Description:
Chassis adopts the gel material, lid is made of high quality acrylic material, USES the quartz sand filter, filtration precision is high, the back flush is simple; Without room, save the money into building room, also need not in the building the other accessory structure and convenient operation.
Massage with a circulating pump, pump, sand cylinder out of 800 mm, drug delivery device, device, water pipe and in and out of the gate, makes the water filter more thoroughly, avoid to produce short flow and a corner. According to take over in a different way, and can realize circulating backwater, pollution, emptying, and other functions.
| power |
voltage |
flow rate |
filtration fineness |
filtration area |
running noice |
size |
| 2HP |
220V |
25m3/h |
≤5μ |
0.50M 2 |
≤40dB |
1154x1324x1270mm
|
INSTALLATION:
1. Clear away any debris from the installation area, and make a datum mark before installation.
2. Place the unit in a proper position according to the installation detail drawing. Adjust the unit with a level to make sure the tolerance is less than 2mm, use the filter pieces to pack the unit level, fix the packing pieces, then fill in th vacant area with grout.
3. Connect drainpipe and cable pipe as shown in the installation detail drawing. The control box must be damp proofed. Electrical installtion and testing must be done by a licensed or certified electrician.
4. Fill in the joint between the unit and pool wall with grout when installing, and seal with sealant.
5. After installation, fill with sand around the unit body. Spread stones on the side of pool to match the pool structure, record the installation notes.
